Water-Based Paint Wastewater Treatment Bluwat Water Decoloring
Translucid Liquid and Colorless
Specific Gravity at 20°C:
PH Value (30% Solution):
Soluble With Water at Any Rate
30kgs net plastic drum, 250kgs net plastic drum palletized, 1250kgs
net IBC drum
Description: BWD Water Decoloring Agent for Wastewater Treatment in
- BWD-01 Water Decoloring Agent is a special product, high efficient
working for textile dyeing wastewater color removal, especial the
wastewater containing the hydrophilic dyes (reactive dyes, acid
dyes, disperse dyes, etc.), less dosage, the color clear, fast
speed, high processing liquid clarification of the settlement, also
improve the COD removal rate.
- BWD-01 Water Decoloring Agent is a new type of high-performance
decolorizing flocculant, It is a color removal chemical, especially for de-coloring,
flocculating, CODcr decreasing and other applications used to
remove the color of wastewater generated by textiles process houses
and dyes industries and other fields.
- It has high color removal of dye wastewater, by providing a large
number of cations, the negative charge is brought on dye molecules
are neutralized instability, at the same time with BWD-01 Water
Decoloring Agent by a large number of hydrolysis of flocs. Can be
adsorbed dye, destabilization of the snare, from water separation,
so as to achieve the purpose of bleaching.
- It is medium molecular weight polymeric coagulant and highly
efficient decoloring flocculant.
- The colored effluents, generated by the industries, when left
untreated, play havoc with reusable water resources. For process
houses, in water-scarce areas, it comes as heaven-sent facilitating
recycling of the industrial effluent into process water. BWD-01
Water Decoloring Agent is used to solve this problem.
High performance to remove textile wastewater color.
Used to de-color high-coloring effluent from dyestuffs plants.
Stronger decolorization (50%~99%) and removal of COD (50%~80%).
Used to treat effluent from textile and dyeing industry, pigment
industry, printing ink industry, and paper industry.
Can ben used as a retention agent in the paper & pulp
Faster sedimentation, better flocculation.
Non-pollution (no aluminum, chlorine, heavy metal ions, etc.).
It can be used before or after biological treatment.
Less sludge produced than other inorganic coagulants.
Make solution first, with BWD-01, mix with 40 times water to have
2.5% solution for use.
Make PAC solution, 2-5% Al2O3
Have solution of Anionic Polyelectrolyte, 0.1%.
Have effluent, test pH value, adjust pH value to 8-9.(It is very
important, higher or lower pH, BWD-01 works not well)
Add PAC solution, mix with effluent completely. about 1-3 minutes
Add BWD-01 solution, mix with effluent completely, about 5-10
Add small content of anionic polyelectrolyte solution, mix slowly
to have big floc. (this step is suggestion)
Check color for treated effluent
Adjust dosage of BWD-01 and PAC to do more test to have better