Phosphatation Process Flotation Flocculant Anionic Polyacrylamide
- Blufloc AS5615 is highly efficient polyacrylamide flocculant, which
not only speeds up clarification, but alsostrengthens the floc
against shearing forces mainly during the desweetening stage, it is
working perfect in melt raw sugar flotation, low dosage and quick
separation of the flocs.
- It has high performance of color removal of syrup, more than 50%.
- Safe, non-toxic, hydrolytic stability, is not sensitive to the
change of pH value, anti-chlorine. Harmless, no-flammable and
non-explosive, it can be stored at room temperature,
Blufloc Polyacrylamide in Sugar Industry:
|Trade Name:||Anionic / Flocculant / Polyelectrolyte / APAM|
|Active Ingredient:||High molecular weight polymer|
|Chemical Name:||Anionic Polyacrylamide / Polyelectrolyte / Flocculant /|
|Equivalent to:||LT25, LT25, Chemfloc LT27, 605 etc|
|Port of Loading:||Shanghai Port, China|
|Delivery Time:||Within 10 Working Days After Got Your Payment|
|Package:||Packed in 25kgs kraft bag or white PE bag on pallet and
18-20ton/FCL, or 750kgs big bag|
|Applications:||Sugar clarification, sedimentation and flotation|
|Sample:||Free to test|
|Blufloc AS5615 Polyacrylamide Specifications:|
|Appearance:||Off-White Granular Powder|
|Molecular Weight:||Medium high|
|Hydrolysis Degree:||Medium low|
|Bulk Density:||About 0.6-0.8|
|Specific Gravity at 25°C:||1.01-1.1|
|Recommended Working Concentration:||0.1-0.5%|
|PH (1% aqua solution):||6-9|
Melt Raw Sugar Flotation:
Blufloc AS5615 Grade Competitive Advantage:
|1||Medium Molecular Weight and high Charge Degree.|
Economical to use - lower dosage levels.
|3||For Water treatment as flocculant to make flocs|
Easily soluble in water; dissolves rapidly.
Non corrosive of suggested dosage, economical and effective at low
10 years manufacturing experience, with more than 20 technical
Blufloc AS5615 Grade Application Methods:
Polyacrylamdie (polyelectrolyte/flocculant) should be standardly be
dissolved to 0.1-0.5% concentration.
The time required to dissolve the flocculant varies according to
the type of flocculant, water quality, temperature and agitation.
However, most flocculants generally require around 1 hour of
agitation to completely dissolve the powder. Incomplete mixture of
flocculant or lumping may inhibit the performance of the
The ideal revolution of the agitator is between 200-400rpm. A high
speed agitator operating without reducing the revolution of a motor
is not advised, since it may cut the molecules of the flocculant.
An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank.
The dosage range of varies from 1 - 3.0 ppm depending upon the type
of effluent and application. Advised to do jar tests for evaluating
the functioning and approximate dosage.
Put sample of effluent in a beaker and add it as designated,
agitate for 1 minute at 100-120 rpm and then slowly agitate at
60rpm. Determine the flocs properly at this time and note the
sedimentation and clarity of top solution.
Blufloc AS5615 Grade Package and Storage:
- Packed in Kraft or PE bags with inner plastic bags, with each bag
containing 25kgs, or 750kgs net big bag.
- Stored in original packaging in cool and dry place, away from
sources of heat, flame and direct sunlight.