EM532 Equivalent Blufloc Anionic Polyacrylamide Emulsion Water
- Blufloc EA6516 is anionic polyacrylamide emulsion product, it is
water in oil solvent type, with high molecular weight and medium
charge degree, equivalent to Flopam EM-532.
- Mainly used for various industrial wastewater flocculation
sedimentation, sedimentation and clarification treatment, such as
iron and steel plant wastewater, electroplating wastewater,
wastewater metallurgy, coal washing wastewater treatment, sludge
dewatering. Can also be used to clarify and drinking water
purification treatment, and drilling field.
- Due to the polar groups on the molecular chain containing a certain
amount, it can through the adsorption of solid particles suspended
in water, bridging between particles or through the charge and make
the particle formation of large flocs condensation. So, it can
accelerate the settlement of particles in suspension, have obvious
to speed up the solution to clarify, promote filtering and other
Blufloc Anionic Polyacrylamide Emulsion Specifications:
|Approximate Brookfield Viscosity at 25° C:||>1000cps|
|Specific Gravity at 25°C:||1.01-1.1|
|Recommended Working Concentration:||0.1-0.5%|
|PH (1% aqua solution):||3-7|
Blufloc Anionic Polyacrylamide Emulsion Application Fields:
Coal washing tailing centrifugal separation
Sedimentation and filtration of coal powder and coal mud.
Highly improve the recovery rate of coal powder and the filtration
Nonionic-polyacrylamide for acidophilic water systems.
If matched with PAC, aluminum sulphate, the effect will be
|In floatation and smelting of Zinc, manganese and copper mines, its
leachate and slag can be added into PAM to improve the separation
Textile Sizing, as a kind of composition for chemical grout, starch
Highly improve the adhesive property, penetrability and desizing
enable the textile to have electrostatic prevention performance,
desizing rate, and reduces the starch mixing spots, cloth machine
efficiency, and falling objects.
Used as fixing agent, residency agent, filtration aid and paper dry
intensity reinforcing agent in paper-making industry.
Dissolved into 0.3% concentration and cross-linking agent added.
It can be sprayed on desert to prevent and solidify sand.
Oil field profile controlling and water- plugging agent, matched
and a certain amount of chemical adhesive added.
It can be used as oil field profile controlling and water-plugging
In oil field, as a kind of mud additives.
To increase the viscosity of water and improve the effectiveness of
|9||Chemical mudding agent||as chemical mudding agent for plugging water of dikes, ground
foundation, channels and the like.|
|10||Industrial Wastewater Treatment||Dosing polyacrylamide can reduce the consumption of coagulant and
speed up sedimentation.|
|11||Soil humectants||It can preserve water and solidify sand for soil and can play a
role of humectant on slope grass planting, tree planting, and sand
solidification and dust prevention of soil.|
|12||Sugar mills||As flocculant for sugar flocculation, sedimentation and flotation.|
Advantages of Blufloc Anionic Polyacrylamide Emulsion:
- Economical to use - lower dosage levels.
- Easily soluble in water; dissolves rapidly.
- Non corrosive of suggested dosage, economical and effective at low
- Can eliminate the use of alum & further ferric salts when used
as primary coagulants.
- Reduction in sludge of dewatering process system.
- Faster sedimentation, better flocculation.
- Non-pollution (no aluminum, chlorine, heavy metal ions etc.).
- 10 years manufacturing experience, with more than 20 technical
The dosage range of varies from 1 - 3.0 ppm depending upon the type
of effluent and application. Advised to do jar tests for evaluating
the functioning and approximate dosage.
Put sample of effluent in a beaker and add it as designated,
agitate for 1 minute at 100-120 rpm and then slowly agitate at
60rpm. Determine the flocs properly at this time and note the
sedimentation and clarity of top solution.
Package and Storage:
- Packed in 25kg plastic drums, or 1000kg IBC drums
- Stored in original packaging in cool and dry place, away from
sources of heat, flame and direct sunlight.
Bluwat Chemicals Certificates: