Blufloc Polyacrylamide Flocculant Equivalent to 155 Good
- Blufloc AA5414 is high molecular weight Anionic type polyacrylamide
flocculant in powder form, which is similar to Magna floc 155.
In most mineral processes where there is a need for sedimentation,
filtration or centrifugation then a flocculant or coagulant (also
referred to as polymers) is often desired. The Blufloc AA5414
offers a broad spectrum of products ensuring maximum performance
and cost efficiency in these applications. The main characteristics
of the copolymers are: Molecular weight: 13 to 15 million,
viscosity at 5 g/l: >800 cps. They relate to water treatment and
mining industry. They are also used as thickeners in the petroleum,
textile, cosmetic and other industries.
Bluwat Chemicals manufactures and supplies specialty water
treatment chemicals for oilfield, wastewater treatment, potable
water, mineral processing, sugar and paper industries. The Blufloc
range of anionic, cationic and non-ionic flocculants and coagulants
are produced in China, our company's headquarters is in Yixing.
In addition to our complete range of powder grade polyacrylamides,
marketed under the Blufloc trade name, our company also supplies
polydadmacs (in both powder and liquid form) and polyamine liquid
coagulants to cater for all requirements of the industries that we
serve. Liquid dispersion polymers will be manufactured in Yixing.
Acrylamide production from microbiological technology
Blufloc flocculants and coagulants for mineral processing
The extensive range of Blufloc flocculants and coagulants includes
anionic, non-ionic and cationic charged polymers, all produced at
varying molecular weights, so that all applications in the mineral
processing industry are catered for.
|Blufloc Anionic Polyacrylamide:|
|Trade Name:||Blufloc APAM|
|Active Ingredient:||High molecular weight polymer|
|Chemical Name:||APAM Anionic Polyacrylamide|
|Port of Loading:||Shanghai Port, China|
|Delivery Time:||Within 10 Working Days After Got Your Payment|
|Package:||Packed in 25kgs kraft bag or white PE bag on pallet and
18-20ton/FCL, or 750kgs big bag|
|Applications:||Drilling, oil & gas, Enhanced oil recovery|
|Sample:||Free to test|
|Bulk Density:||About 0.6-0.8|
|Shelf Life:||2 years|
Key Features and Benefits:
|1||High formation rate can increase dewatering capacity by 10-30 %.|
|2||It can make the cake moisture content lowers, reduce incineration
fuel by 10-20 %.|
|3||Improved separability of cake from filter cloth can improved the
|4||Blufloc AA5414 displays marked effects also on putrefied sludge,
enabling stable operation..|
|5||Breakage of floc decreases and the separation efficiency at the
decanter is improved.|
Applications for our products are found in many industries
- Gold / silver
- Lead / zinc
- Iron / steel
- Titanium dioxide
- Phosphoric acid
- Sand / gravel
How To Use The Blufloc Polyacrylamide?
Application and Dosage:
The dosage range of varies from 0.2 - 3.0 ppm depending upon the
type of effluent and application. Advised to do jar tests for
evaluating the functioning and approximate dosage.
Put sample of effluent in a beaker and add it as designated,
agitate for 1 minute at 100-120 rpm and then slowly agitate at
60rpm. Determine the floc properly at this time and note the
sedimentation and clarity of top solution.
Procedure and precautions upon dispersion and dissolving
Dissolving time: The time required to dissolve the flocculant varies according to
the type of flocculant, water quality, temperature and agitation.
However, most flocculants generally require around 1 hour of
agitation to completely dissolve the powder. Incomplete mixture of
flocculant or lumping may inhibit the performance of the
Agitation speed: The ideal revolution of the agitator is between 200-400rpm. A high
speed agitator operating without reducing the revolution of a motor
is not advised, since it may cut the molecules of the flocculant.
An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank.
Dissolving concentration: Flocculants should be standardly be dissolved to 0.1-0.5%
concentration. It is also effective to start dissolving at a
slightly higher concentration, and then dilute the flocculant
mixture immediately before use.
Handling measures and precautions:
Proper human safety products such as Splash goggles, lab coat,
vapor respirator, gloves and boots should be worn while handling
and applying chemicals. Splashes on skin should be washed off with
water immediately. In case of splashing into the eyes, flush it
with fresh water and obtain medical attention. Should not be
injected. Please refer MSDS for more details.
Packaging & Shipping:
- 25kg net kraft paper bags or white PE bags on pallet, 18-20tons in
20' container, or 750kgs big bag and 15tons FCL.
- Stored in original packaging in cool and dry place.
- Shelf life: 2 years.
Bluwat Main Products:
- BWD-01 Water Decoloring Agent , for color removal for textile dyeing wastewater treatment and
for other wastewater .
- Poly Aluminium Chloride(PAC) , for drinking water treatment for wastewater treatment.
- Polyacrylamide (PAM)/Polyelectrolyte , for water treatment, for suldge treatment.
- PHPA(Partially Hydrolyzed Polyacrylamide) For Drilling , for drilling mud additive in the oilfield.
- Ferric Sulphate , for drinking water and wastewater treatment.
- PolyDADMAC , for water treatment and for paper mills and for cosmetics.
- Polyamine, for drinking and wastewater treatment, sludge dewatering, paper
making and oilfield.
- Aluminum Chlorohydrate(ACH) liquid & powder, for drinking water treatment and other fields.